Comprehensive detection and decontamination solutions for shipping containers to protect worker health and ensure regulatory compliance.
Shipping containers may contain various hazardous substances that present significant health risks to workers who handle, open, and unload them.
Containers are routinely fumigated with toxic gases to prevent the spread of pests and micro-organisms across international borders. These fumigants can persist long after treatment and pose serious health risks. Common fumigants include phosphine, methyl bromide, sulfuryl fluoride, formaldehyde, and chloropicrin, all of which can cause severe respiratory issues and other health problems even at low concentrations.
Products shipped in containers may release volatile organic compounds (VOCs) from manufacturing materials, plastics, textiles, and electronics. These compounds accumulate in the confined space of the container. The EPA classifies seven VOCs found in container emissions—acetaldehyde, benzene, ethylbenzene, methanol, m/p-xylene, o-xylene, and toluene—as hazardous air pollutants, with acetaldehyde considered a probable human carcinogen and benzene a known human carcinogen
The enclosed environment of shipping containers can harbor various biological contaminants that pose health risks to workers and may contaminate cargo. These include mold and fungi that thrive in humid conditions, bacteria growing on organic materials during transit, insect infestations that may survive fumigation, and rodent contamination leaving droppings and urine that present additional health hazards.
Container decontamination is subject to various international and national regulations designed to protect worker health and ensure safe handling procedures.
The International Maritime Dangerous Goods (IMDG) Code requires proper labeling of fumigated containers, while the International Maritime Organization (IMO) provides recommendations for the safe use of pesticides in ships through MSC.1-Circ.1361. The International Labour Organization (ILO) Convention 155 addresses occupational safety and health concerns related to container handling and decontamination.
OSHA regulations provide a framework for worker protection during container handling, while EPA guidelines govern fumigant use and environmental impact. Customs requirements for container treatment and documentation vary by country. Compliance with these regulations is essential for legal operation and worker safety, with potential penalties for non-compliance including fines and operational restrictions.
ISO standards provide guidelines for container safety and handling, while ISPM-15 establishes international standards for wooden packaging materials in international trade. These industry standards complement regulatory requirements and provide best practices for container decontamination, handling, and safety verification, helping to ensure consistent approaches across global supply chains.
EnviroDecon provides comprehensive container decontamination services using advanced detection technologies and military-grade decontamination solutions.
Our Fourier Transform Infrared (FTIR) gas detection technology provides real-time monitoring of airborne contaminants in container environments, allowing for immediate identification of hazardous gases before workers are exposed.
Simultaneously measures up to 50 different gases, providing comprehensive detection of both fumigants and VOCs. This capability ensures that no hazardous gases are overlooked during container assessment.
Provides immediate readings without waiting for laboratory analysis, allowing for quick decision-making about container safety. This speed minimizes delays in container processing while maintaining safety standards.
Precisely identifies and quantifies each gas present, enabling targeted decontamination approaches. This specificity helps determine the appropriate safety measures and decontamination protocols for each container.
Allows for on-site testing without delaying container processing. Our equipment can be brought directly to container yards, warehouses, and distribution centers for immediate assessment.
Detects both expected fumigants and unexpected toxic gases that may be present from cargo off-gassing. This thorough approach ensures that all potential hazards are identified before worker exposure.
Records detailed analysis for compliance and safety records, providing documentation that can be used for regulatory compliance and due diligence. This documentation helps protect companie
Our advanced fluorescence imaging technology reveals biological contamination that is invisible to the naked eye, allowing for targeted decontamination of container surfaces and verification of cleaning effectiveness.
Reveals organic residues on container surfaces using specific wavelengths of UV light that cause biological materials to fluoresce. This technology makes invisible contamination visible, enabling precise remediation.
Detects microbial colonies and biofilms in container corners and crevices that may harbor pathogens. These areas are often missed during visual inspections but can be clearly revealed with fluorescence imaging.
Creates visual maps of contamination distribution for targeted remediation, allowing for efficient use of decontamination resources. This mapping ensures that no contaminated areas are overlooked during treatment.
Provides before-and-after visual confirmation of decontamination effectiveness, ensuring that all biological contamination has been successfully removed. This verification is essential for quality assurance.
Captures images for compliance records and verification reports, providing visual evidence of contamination assessment and successful decontamination. These records support regulatory compliance efforts.
Evaluates container surfaces without damaging cargo or container materials, allowing for thorough inspection without compromising container integrity or contents. This non-invasive approach preserves cargo value.
Our FLIR thermal imaging technology provides critical insights by visualizing temperature differences, helping to identify potential moisture issues, structural concerns, and heat distribution during decontamination.
Identifies areas of moisture accumulation that could harbor mold and bacteria, allowing for targeted drying and decontamination. Moisture is a primary factor in biological contamination of containers.
Detects potential damage to container integrity that may affect decontamination effectiveness or cargo safety. This assessment helps identify containers that may require repair before decontamination.
Ensures even distribution of heat treatments during decontamination, preventing cold spots where contaminants might survive. This analysis optimizes thermal decontamination processes for maximum effectiveness.
Locates potential entry points for water or pests that could compromise container integrity and contribute to contamination. Identifying these issues helps prevent future contamination problems.
Our proprietary Enviro DF-200 decontamination solution provides broad-spectrum efficacy against chemical and biological contaminants, ensuring a safe environment for container handling and unloading.
Eliminates a wide range of bacteria that may be present in container environments, including pathogens that can cause illness in workers. This comprehensive antimicrobial action ensures thorough decontamination.
Neutralizes viruses that may be present on container surfaces or in the air, providing comprehensive disinfection. This capability is especially important for containers carrying organic materials.
Destroys mold and fungi that commonly develop in the humid environment of shipping containers during transit. These organisms can cause respiratory issues and allergic reactions in workers.
Helps neutralize residual fumigants and hazardous chemicals through chemical reaction, reducing their concentration to safe levels. This neutralization is essential for containers that have been fumigated.
Can be deployed as a foam, liquid, spray, vapor, or fog as needed for different container configurations and contamination scenarios. This versatility ensures effective application in all container types.
Biodegradable formulation with minimal environmental impact compared to traditional decontamination chemicals. This eco-friendly approach aligns with sustainability goals while maintaining effectiveness.
EnviroDecon follows a systematic, science-based approach to container decontamination that ensures thorough assessment, effective treatment, and verified results.
We begin with comprehensive detection using our advanced technologies:
Based on our detection results, we develop a tailored decontamination strategy:
We implement our tailored decontamination protocol using Enviro DF-200:
We confirm decontamination effectiveness and provide comprehensive documentation:
Our container decontamination services are applicable across various industries and settings where shipping containers are handled and processed.
Our comprehensive approach to container decontamination provides numerous benefits across health and safety, operational efficiency, regulatory compliance, and environmental responsibility.
Protect your workers and comply with regulations with our comprehensive container decontamination services. Contact us today to discuss your specific needs and schedule a consultation.
Explore our other specialized decontamination services that complement our container decontamination solutions.
Specialized decontamination services for tanks, vessels, and other confined spaces with similar hazards to shipping containers.
Comprehensive decontamination services for manufacturing plants, warehouses, and other industrial facilities.
Specialized decontamination services for trucks, trailers, railcars, and other transportation equipment.
Rapid response decontamination services for chemical spills, releases, and other emergency situations.
